Return to Website

MoldMaker's Forum

This is a place where those involved with the moldmaking industry can come together to share information, ask questions, offer tips, etc.
(It may be necessary to refresh/reload your browser window after posting in order to see your post as well as any other new posts.)

***Posts containing negative opinions about specific products or services will be deleted if no contact information is provided.***

If you have problems using this forum, or need technical advice, please send an email to info@ctipublishing.com.

*The views and opinions expressed in this forum are not necessarily the views of MoldMaking Technology magazine.*

MoldMaker's Forum
Start a New Topic 
Author
Comment
COLD POT AND FLASHLESS MOLD MAKING

Where can I get details and guidelines for the design of Cold pot transfer and flashless molding for Rubber Part Molds?

Re: COLD POT AND FLASHLESS MOLD MAKING

Both technologies are used by WTG in Quebec. They have molds made by Toyota as well as our company flash-less with cold pot transfer. The flash-less technology is under development and is confidential so far, that why you can't find any information on the net. To know more, you need to join either WTG or us as emploee.

Re: COLD POT AND FLASHLESS MOLD MAKING

We realize that the information is held pretty closely however during this year we will probably make at least 1 production tool just because we did a proto which is performing well so we will get to make the next step. That particular project is a wasteless tool.